MAREA engagement rings in yellow gold - BRAVORA jewelry

1/17

MAREA | Oval ring

€2.140,00

Metal:18k yellow goldVer metales →

Gema principal:Ver Calidades (4C) →

Quilates:

Cut: View size guide →

Quality (4Cs)

The 4Cs are the four characteristics that define a diamond: Cut, Color, Clarity and Carat. At BRAVORA we hand-select every diamond seeking the best value for money, so your piece sparkles to its fullest with the naked eye. We don't push you to pay for details the eye can't perceive. Our minimum is always DEF color, VS+ clarity and excellent cut, with the carat weight you choose. Looking for a diamond with specific characteristics or larger than the selector allows? Write to us.

Cut is the most important C: it defines how light enters and reflects. An excellent cut returns maximum sparkle, even above size or color. We always work with excellent polish and symmetry.

Shallow Ideal Deep

An ideal cut captures light and returns it upward (maximum brilliance). If it's too shallow, light escapes through the bottom; if it's too deep, out the sides. At BRAVORA we always work with an ideal cut.

BRAVORA standard: excellent polish and symmetry

Color measures the absence of yellow tones: the full scale runs from D (colorless) to Z. The more colorless, the rarer. At BRAVORA we always work in the highest range; D, E and F are completely colorless. Slide to see how it changes.

JIHGFED

D · Colorless: the highest grade, completely colorless.

E · Colorless: virtually indistinguishable from D, only an expert can tell them apart.

F · Colorless: minimal differences, noticeable only to an expert eye.

G · Near-colorless: colorless to the naked eye and with excellent value for money.

H · Near-colorless: looks white, especially once set.

I · Near-colorless: the faintest warmth, barely perceptible.

J · Near-colorless: a slight warm tone, visible only in direct comparison.

BRAVORA standard: D, E and F (colorless)

Clarity describes the tiny natural inclusions inside a diamond. The fewer there are, the higher the grade. Slide to see them under 10x magnification.

I1SI2SI1VS2VS1VVS2VVS1IF

IF · Internally Flawless: no inclusions visible at 10x magnification.

VVS1 · Minuscule inclusions, very difficult to see even at 10x.

VVS2 · Minimal inclusions, hard to spot at 10x.

VS1 · Small inclusions that are hard to see at 10x and invisible to the naked eye.

VS2 · Minor inclusions, invisible to the naked eye.

SI1 · Inclusions visible at 10x, usually not to the naked eye.

SI2 · Inclusions visible at 10x and sometimes to the naked eye.

I1 · Obvious inclusions that can dull the brilliance.

BRAVORA standard: VS2 or higher (eye-clean)

Carat is the weight of the diamond, not its size. At equal quality, a fine cut makes the stone appear larger. Choose the shape and slide to see it on the hand.

Shape:

2,0 ct

0,5 ct5 ct

2,0 ct · approximate size of the diamond on a size 6 (US) finger, with a 2.3 mm band

Your sample diamond

The photograph on this page shows a sample diamond with F color, VS2 clarity and 2 carats, with excellent polish and symmetry to ensure maximum light refraction.

It's the minimum quality we offer under our standard, which is already excellent. We send back any gems that don't convince us, and that's why we don't let you choose the diamond online: there are details we can only judge in person.

IGI certificate

Every diamond over 0.5 carats comes with its certificate from IGI (International Gemological Institute), an independent gemological laboratory that verifies its characteristics. So you know exactly what you're receiving.

On your certificate you'll find: 1 Cut· 2 Color· 3 Clarity· 4 Carats.It also includes the measurements, polish, symmetry and the number laser-inscribed on the diamond.

Important: only round-cut diamonds receive a Cut Grade on the certificate; the system was designed for the round brilliant. Fancy shapes (oval, emerald, pear…) carry no such grade, so we choose them ourselves by examining their proportions — table, depth and girdle — to keep the one with the finest characteristics.

The bowtie effect

In elongated cuts (oval, pear, marquise) we watch for the bowtie effect: a bowtie-shaped shadow at the center of the gem. A pronounced bowtie dulls the brilliance; a well-controlled one keeps the stone alive from edge to edge.

It's one of those details you can only judge in person, gem by gem. That's why we choose every stone ourselves.

Elongated gemstone ratios

The ratio (length-to-width) defines the silhouette. These are the ranges we typically use at BRAVORA for each elongated cut:

Cut	Ideal ratio (Bravora)
Oval	1,35 – 1,50
Pear	1,45 – 1,65
Marquise	1,85 – 2,10
Emerald	1,35 – 1,50
Radiant	1,20 – 1,50

Looking for something specific—a particular ratio, clarity or color? Write to us and we'll source it for you.

Message us on WhatsApp

Grabado: Gratis - hasta 12 caracteres

Tamaño de la gema según corte y quilates

Medida media en milímetros (mm). El largo × ancho aplica a los cortes alargados.

Corte	0,5	1	1,5	2	2,5	3
Brillante	5,1	6,4	7,4	8,1	8,7	9,3
Princesa	4,4	5,5	6,4	7,0	7,5	8,0
Cojín	4,9	5,5	6,5	7,0	7,5	8,0
Esmeralda	5,5×4	6,5×5	7,5×5,5	8,5×6	9×6,5	9,5×7
Radiante	5×4,5	6×5,5	7×6	7,5×7	8×7,2	8,5×7,5
Oval	6×4	8×5,5	9×6	10,5×7	11×7,3	11,5×7,5
Pera	6×4	8×5	9×6	10×6,5	10,5×7	11×7,5
Marquesa	8,5×4	10,5×5	12×6	13×6,5	13,5×6,8	14×7

Son medidas medias orientativas. Las medidas exactas varían según el tamaño (quilates) y, sobre todo, según la proporción (ratio) de cada piedra, especialmente en los cortes alargados (oval, marquesa, pera, esmeralda): un mismo peso puede verse más estrecho y largo, o más ancho y corto.

¿Buscas una gema de más de 3 quilates? Escríbenos y la conseguimos para ti.

Size guide

In France, Germany and Portugal, the size is the inner circumference in mm. The Spanish size —the one we use at BRAVORA— is that circumference minus 40, just like in Italy.

The resizing range depends on the model (eternity bands cannot be resized). Check it in RING DETAILS.

Inner diameter (mm)	Circumference mm (France · EU · Portugal)	Spanish · Italian size (BRAVORA)	US size	UK size
14,7	46	6	4	H½
14,9	47	7	4¼	I
15,3	48	8	4½	J
15,6	49	9	5	J½
15,9	50	10	5¼	K
16,2	51	11	5½	L
16,5	52	12	6	L½
16,8	53	13	6¼	M
17,2	54	14	7	N
17,5	55	15	7¼	O
17,8	56	16	7½	O½
18,1	57	17	8	P
18,4	58	18	8½	Q
18,8	59	19	9	R
19,1	60	20	9¼	R½
19,4	61	21	9½	S
19,7	62	22	10	T
20	63	23	10¼	T½
20,3	64	24	10½	U
20,6	65	25	11	V

How to measure your size

Option A: use a ring you already own. Measure the inner diameter (from inner edge to inner edge) and find that measurement in the Diameter column.

Option B: measure your finger. Wrap a strip of paper around your finger, mark where the ends meet, measure the millimeters and divide by 3.14 to get the diameter.

Tip: measure at the end of the day, when your finger is slightly more swollen.

Not sure about your size? Write to us

Fecha estimada de entrega: Si lo necesitas antes, contáctanos.

Agenda una llamada →

The MAREA engagement ring stands out for its unique design: a center stone accompanied by side stones that add brilliance and harmony. Elegant and luminous.

In elongated shapes, the length-to-width ratio defines the final look of the stone: a lower ratio gives a wider silhouette; a higher one, a more slender, elongated shape. The ratio used in our models for the oval cut is between 1.35 and 1.50.

Size adjustment: this ring can be resized up to 3 sizes above or below the selected size.

Technical specifications

Reference: BRV-ENG-MAREA-DIA-OVAL
Band width: 2.6 mm
Band depth: 1.8 mm
Center stone: 10.5 x 7 mm at 2.00 ct **
Stone height above the band: 2.7 mm at 2.00 ct ***
Average number of accent stones: 56 *
Average weight of accent stones: 0.11 ct *
Setting: Prongs (4 prong)

Main stone

Shape: Oval
Quantity: 1
Selectable weight: From 0.5 to 3 ct
Average color: DEF
Minimum clarity: VS+
Setting: Prongs (4 prong)

Secondary stones

Lab-grown diamond
Average color: DEF
Minimum clarity: VS+

* The number and weight of the accent stones vary depending on ring size; the center stone does not vary (reference: size 12 ES).

** The size of the center stone corresponds to the one shown in the images (2.00 ct); it is configurable and may vary in lifestyle photos and videos.

*** The height indicated corresponds to the reference weight (2.00 ct); the stone sits higher or lower above the band depending on the carat weight selected.

Each ring is made to order in local workshops.
Estimated production time is 3 to 5 weeks.
Free shipping, with insurance included, throughout Europe

Lifetime warranty against manufacturing defects.
One free ring resizing within the first 90 days after delivery.
Returns or exchanges possible within the first 14 days if the ring has no engraving or other customizations.
Custom rings cannot be returned.

KNOW YOUR SETTING

BAND WIDTH

2,0 mm

Medium width all around the ring

SETTING PROFILE

Medium

More comfortable | only with a curved band

KNOW THE MATERIALS

METAL

14k gold

18k gold

Platinum

Metal percentagepure

CUT

Ideal

Exc.

MB

B

Acc.

Maximum brilliance and light dispersion

COLOR

D

E

F

G

H

I

J

Colorless| no yellow tones

CLARITY

FL

IF

VVS

VS

SI

Flawless | clean to the naked eye

CERTIFICATIONS

IGI - International Gemological Institute | RJC - Responsible Jewellery Council

Certificado IGI en diamantes de más de 0,5 quilates

Customer reviews

Couples who have already said yes!

Irene

"I spent more than 8 months searching for any ring that could come close to the idea I had in my head, and thanks to finding their profile on TikTok and sending them some sketches, the ring I had imagined literally came to life."

Rafael

"The experience with BRAVORA has been spectacular from the very first moment. They guided us through the entire process, understood exactly what we wanted, and advised us based on my partner's tastes — and the result exceeded every expectation. The ring isn't just beautiful; it carries a meaning that will stay with us for life. Thank you for making it so special."

Marc

"They helped me choose the perfect design, listening to what I wanted and advising me with incredible patience. You can tell they work with care and dedication. The result was beautiful and arrived even earlier than expected. If you're looking for a special engagement ring made with love, this is the place."

Juan

"I went through the engagement ring creation process with Sandra after discovering her on social media, and it was absolutely the right choice. In addition to the initial call, we had a second one to keep refining the details, and we were always in touch by email. Sandra made sure to give me recommendations and let the ring be as perfect as it ultimately was."

Arnau

"The ring design is fully customizable through their website, the quality and finishing are perfect, communication has been very smooth and attentive — they advise you and guide you through the whole process, meeting every detail and delivery deadline. We are very happy."

Nil

"It's been an amazing experience. From the very first day I spoke with Sandra, she was attentive to every detail — the design and everything. She helped and guided me at every step to make the best decision.
I'm so happy and my fiancée absolutely loved it!
It was a true discovery and a 100% recommendable experience!!"